VE-PG4 RoIP Gateway Module The VE-PG4 is a versatile RoIP (Radio over IP network) gateway unit, which seamlessly interconnects LMR radios, LTE radios*, IP communication terminals, IP phone systems and external devices. In addition to the IP Network (LAN/WAN), the built-in LTE module (network coverage provided by a custom SIM card) provides virtually nationwide communication coverage.
*Icom custom SIM card required for LTE systems/use. All in One Package
The VE-PG4 includes built-in RoIP, SIP gateway, IP router, IP PBX and IP communication terminal controller functions, in one box. In comparison with a similar system combining several devices, installation and administration of the integrated VE-PG4 is much simpler. Call Recording to a USB Drive
Incoming/Outgoing calls can be recorded to an external USB device connected to the VE-PG4. Up to four recording settings are programmable. In addition, the 'Monitor' function transfers the received audio data to an intended device. Position and Status Information
GPS position and status information from the IP501H/IP501M LTE transceivers can be received and transferred to a PC to track the location of the radio users or a user in a vehicle.
* GPS mapping software is required for GPS data. Serial Pass-Through Function
The Serial Pass-through function enables you to connect a serial device to the VE-PG4 to extend the communication range between the connected device and a controller PC. The virtual serial port software for Windows® PC is supplied with the VE-PG4. SIP Server and IP-PBX Functions
The built-in simple SIP server enables you to assign IP phone numbers with extension groups. The VE-PG4 can be connected to external SIP server as a client. The following IP-PBX settings are programmable:
• Voice Phonebook
• DID (Direct Inward Dialing)
• Used with Panasonic KX-UT and KX-HDV series IP phones
• Call log
• Extension presence
• Phone number routing
• Outside line regulations
• Caller prioritisation
• External call limiting
• SIP conferencing Router Functions with VPN Tunnel
The VE-PG4 supports LAN, DHCP client, Static IP or PPPoE connections. The VPN function creates a secure IP tunnel connection over the Internet. Half-width 1U Form Design
The VE-PG4 occupies only half the width of a 19-inch rack. It can be functionally installed with repeaters, switching hubs and other equipment. LTE (4G)/3G antenna bases with 1.5 m (4.9 ft) of cable are supplied in case antennas need to be relocated for better reception. Online Firmware Update
The VE-PG4 supports automatic and online firmware update functions, for remote maintenance. Settings can be saved to a backup file, and easily restored. Management Features
• SYSLOG and SNMP
• Telnet and SSH
• Ping Test and Traceroute Test
• Abnormal condition monitoring, such as LAN port link-down and SIP server registration error
• Administrator password
• SNTP server
• Security slot Built-in Controller for the IP100H, IP Communication Terminal (Wireless LAN)
The VE-PG4 has a built-in IP100H IP communication terminal controller function that is capable of controlling up to 50 IP100H IP Communication Terminals. The IP100H can send and receive voice and pre-programmed text messages to the other units through the wireless LAN access points. The IP communication terminals are suitable for intra-building communication, which will communicate anywhere your network has Wireless LAN access. Easy System to Set Up
The VE-PG4 programs almost all terminal configurations over the air. Individual PC programming through a cable connection is not required.
- LTE (4G) and 3G network connection*
* Icom custom SIM card required.
- Wireless LAN transceiver controller built-in (equivalent to IP1000C function)
- Interconnection with IP phone
- IDAS Conventional and Type-D multi-site trunking connection
- Analogue radio system connection
Voice recording function to a USB drive*
*A USB drive required, not included
- External equipment, sensor connection
- VPN router function
Hand Microphone for PMR transceivers.
Hand microphone for IC-A120E
The IC-FR5300/FR6300 is a 32 channel VHF/UHF repeater combining analogue FM and IDAS digital mixed mode operation. The optional UC-FR5300 network/controller board provides IP network connectivity, and it is scalable to multi-site conventional, simulcast conventional, and Type-D trunking capabilities. The IC-FR5300/FR6300 is another addition to Icom’s robust series of professional repeaters that support countless systems worldwide.
5m (16.4ft) cable for the IC-M605EURO VHF marine transceiver. Waterproof 8-pin connector.
5m audio connection cable for the IC-A110E, IC-A120E and IC-F5062 series. RJ-45 modular plug connector with speaker plug.
5m audio connection cable for the HM-152 or SM-26. Modular jack connector with speaker jack.
5m (16.4ft) cable for a serial device with RS-232 connector.
The RC-FS10 is an IDAS conventional IP network upgrade and remote communicator. The IDAS conventional IP network links up to 16 IDAS conventional repeaters via an IP network and can extend an organisations communication range to virtually anywhere. The RC-FS10 remote communicator package creates an IP-based virtual radio and works like a simple dispatcher. The IDAS IC-F3162 and IC-F5062 series of radios (with UT-126H IDAS digital unit installed), can be used in the IDAS conventional IP network without hardware or firmware modification.
- RMS-IP LTE Radio Dispatcher
RMS-IP is a powerful IP based PC dispatcher that not only allows you to manage your Icom LTE radio network but also serves as an additional virtual radio on your system. RMS-IP enables a controller to communicate with your team, monitor all radio activity in real-time and ultimately manage your day to day business issues more efficiently. As part of Icom's LTE radio system, RMS-IP provides an important addition to your licence free, nationwide, full-duplex communication network.
The SM-26 desktop microphone is an affordable Icom desktop microphone for the Private Mobile Radio market.
The VE-PG4 is a powerful RoIP (Radio over IP) Gateway that functions as a bridge to interconnect various devices on a radio network. The VE-PG4 allow organisations to interconnect different communications systems without limitations imposed by distance, security, or technology.
- Introducing Two New Videos Focussing on Icom's Latest LTE and RoIP Products - 13/01/2021
- New Case Study: 2CL, Providing Professional, Dependable Communication to the UK Events Industry - 14/12/2020
- RMS-IP LTE/PoC Radio Dispatcher, Now Available! - 16/09/2020
- Introducing the IC-SAT100M Satellite PTT Mobile radio - 28/07/2020
- Find out more about Icom’s New LTE Radio System with our Knowledge Base Articles - 07/06/2020
- Icom LTE and Satellite Radio Solutions on Show at FCS Business Radio 2019 - 06/10/2019
- Latest Video: Icom IC-SAT100 Satellite PTT - 09/09/2019
- Latest Video: ‘Introduction to the Icom LTE/PoC Two Way Radio System’ - 09/09/2019
- Icom LTE Radio Solutions on Display at LAMMA 2020 (Stand 17.616) - 01/09/2019
- Icom to Showcase New Radio Products at the Emergency Services Show - 29/08/2019
- Icom IC-SAT100 PTT Satellite Radio, Available Now! - 10/07/2019
- Introducing the Icom VE-PG4 Radio Gateway, Providing Seamless Multi-Protocol Connectivity - 26/06/2019