Back | Home › Icom Accessories › Miscellaneous

Miscellaneous

AD-52

Earphone Jack Adapter for IC-F31GS series

AD-118

Allows you to use third party accessories with 6-pin Hirose plug.

AD-135

3.5 mm earphone jack adapter for use with any of SP-27, SP-29 or SP-40 earphone.

AH-4

100W HF Automatic Antenna Tuner can be used with the IC-706MKIIG, IC-7400, IC-756 and IC-756PROII.

AH-5NV

Fiberglass mobile mounting antenna element for use with AH-740. Covers 2.2-30MHz (amateur band) with AH-740.

AH-740

Covers 2.5-30MHz (amateur band). OPC-2321 is required.

BC-M71

Belt Case for the IC-M71 and IC-M73EURO (Radio not included)

CASE.029

Black Nylon Shoulder Strap 2 Clips. For use with CASE.064 and CASE.065

CASE.064

Soft leather case for F1000/2000/F1000D/F2000D/F29SR with D rings

CASE.065

Soft leather case for F1000S/F20000S with D rings

CP-19

Cigarette lighter cable (DC-DC converter is built-in)

CP-20

Cigarette Lighter Cable with DC-DC converter.

CS-4100

Programming software for Windows PC (std) (requires either microSD card/OPC-2350LU/OPC-1529R/OPC-478UL)

CS-51PLUS

Cloning software for ID-51E. (Supplied with ID-51E) Allows memory channels and other settings from a PC.

Remotely reconfigure radios while in the field with the CS-OTPM1 OTAP (Over-The-Air-Programming) Manager. The system operator can edit channels, call lists, status message lists and more, without the need to return the radios to the base station.

CS-R30

Using the CS-R30, you can smoothly edit the IC-R30 settings on a PC

CS-R8600

For Windows® PC

CT-17

CI-V level converter (communications interface)

CT-24

The CT-24 is a USB connection device which converts a microphone audio to an IDAS compatible digital signal.

EX-3187

Display extension cable (5m; 16.4ft) Up to three EX-3187 cables are connectable.

EX-3193

Transom Transducer 600W (50 – 200KHz comes with temperature & speed sensor)

EX-3194

Thru-Hull Transducer 600W (50 – 200KHz comes with temperature & speed sensor)

EX-3195

Thru-Hull Transducer 1kW (50 – 200KHz)

FA-B02AR

Standard antenna for IC-A24/A6

FA-B2E

VHF Antenna

FA-B70C

UHF Antenna

FA-S270C

Antenna VHF/UHF

FA-S27U

ATEX approved antenna for IC-F61 UHF

FA-S57US

The UHF FA-S57US stubby antennas is designed for the IC-F51, IC-F61 and IC-M87 transceivers.

FA-S59V

SMA type antenna (std)

FA-S62VS

The VHF FA-S62VS stubby antennas is designed for the IC-F51, IC-F61 and IC-M87 transceivers.

FA-S63VS

The VHF FA-S63VS stubby antenna is designed for the IC-F51, IC-F61 and IC-M87 transceivers.

FA-S64V

Flexible short-type antenna

FA-S67VC

Cut antenna 136–174MHz

FA-S76UC

Cut antenna 380–520MHz

FA-S82U

Antenna 430–480MHz

FA-S82US

Stubby antenna 450–490MHz

FA-S83V

Antenna 160–174MHz

FA-S83VS

Stubby antenna 160–174MHz

FA-SC24V

Antenna (136-150 MHz)

FA-SC25U

UHF antenna for 400-430 MHz

FA-SC29V

Antenna (160–174 MHz)

FA-SC55V

Antenna (150-174 MHz)

FA-SC56VS

Stubby antenna (150–162 MHz)

FA-SC57U

Antenna (430-470 MHz)

FA-SC57VS

Stubby antenna 160 -174MHz

FA-SC58V

Antenna (150-174 MHz)

FA-SC59V

VHF Antenna

FA-SC72U

FA-SC72U UHF antenna for 470-520 MHz

FA-SC73US

Stubby antenna 450 -470MHz

FL-52A

CW/RTTY Narrow filter (455kHz crystal filter. 500Hz/–6dB)

FL-100

9MHz CW/RTTY narrow filter, 500Hz

FL-103

9MHz SSB wide filter, 2.8kHz

FL-132

FL-132 CW filter, 500Hz (main band)

FL-133

CW filter, 500Hz (sub-band)

FL-222

SSB Narrow filter (455kHz crystal filter. 1.8kHz/–6dB)

FL-257

SSB Wide filter (455kHz crystal filter. 3.3kHz/–6dB)

GPS.001

IC-M31.201 Li-Ion Upgrade Pack

The pack includes a BP-252 Li-Ion battery and a compatible Li-Ion desktop charger.

IC-PW1

Fully automatic 1kW output Linear amplifier for the Icom Range of transceivers. Ideal for connection to the IC-7800, IC-7850, IC-7851, IC-7600, etc.

LC-146A

Carrying Case for IC-R6

LC-151

Soft case for the IC-R3

LC-152A

Carrying case for IC-E90 (cannot use with MB-83)

LC-158

Carrying case for IC-R20

LC-159

Carrying case for IC-A24/A6

LC-174

Carry case. Can be used with all battery packs and battery case for the IC-T70E, IC-V80E and the IC-F3002 Series. Picture shows IC-T70E (radio not included)

LC-178

Helps protect the transceiver from scratches.

LC-179

Helps protect the transceiver from scratches.

LC-183

Carrying case (for use with BP-271)

LC-184

Leather Case (For IC-F3400DT/DS, IC-F4400DT/DS)

LC-185

Carrying case (for use with BP-272).

LC-186

Leather Case (For use with IC-F3400D, IC-F4400D)

LC-187

Hard type carrying case. Charging is possible while wearing the case.

LC-188

LC-189

Carrying case for IC-R30.

LC-190

Leather case for IC-F52D series (with BP-294 in use)

MB-103

Alligator Type Belt clip for BP-208N, BP-209N, BP-210N, BP-211N, BP-222N battery packs

MB-109

Alligator type belt clip.

MB-123

MB-124

Alligator type belt clip

MB-133

Alligator style belt clip

MB-135

Alligator style belt clip.

MB-68

Standard type belt clip

MB-79

Standard belt clip for IC-M87

MB-83

Rotating type belt clip for IC-M21 and IC-E90.

MB-86

Swivel Belt Clip

MB-93

Swivel belt clip

MB-94

Alligator type belt-clip

MB-94EX

Alligator style belt clip

MB-96

Swivel type belt hangar for use with BP-208N, BP-209N, BP-210N, BP-211N, BP-222N battery packs.

MB-96FL

Leather Belt Hanger

MB-96N

Swivel type leather belt hanger (Swivel joint of the MB-86 is required).

MBB-3

Alligator belt clip.

MN-100

Antenna Matcher (Comes with two 8m-antenna wires)

MSFSS260

Stainless Steel Thru-Hull Transducer 1kW (50 – 200KHz)

MXG-5000S

New, smaller, standard GPS Antenna for the MA-500TR AIS transponder. MXG-5000S is about an 1/8 of the size of its MXG-5000 predecessor.

OPC-025

OPC-025 DC power cable

OPC-1000

Extension cable for HM-134B (5m)

OPC-1086

Cloning Cable Adapter (requires OPC-478)

OPC-1088

Compatibility cable (allows compatibility with DS-100.001)

OPC-1132

DC power cable (3m)

OPC-1156

Controller extension cable (3.5m)

OPC-1392

Headset Adapter Cable For VOX hands-free operation

OPC-1443

Seperation Cable (3.5 Meters)

OPC-1444

Seperation cable (5 meters)

OPC-1465

Shielded control cable

OPC-1529R

Data communication cable (RS-232C type)

OPC-1540

20-FT Cables With Waterproof Mounting Plug For HM-162 Series

OPC-1541

Extension cable for HM-162B/SW/E (6m/20ft)

OPC-1542

Extension cable for mic connection from rear panel

OPC-1870

Zone Copy Cable. Handheld to handheld cable

OPC-1929

Transducer extension cable (6M)

OPC-1939

15-pin accessory cable

OPC-2004

Plug adapter cable. OPC-2004 is required when using the HS-94, HS-95 and HS-97 with the IC-V80E and IC-F3002 Series

OPC-2004LA

Provides VOX operation for the HS-97.

OPC-2006

Plug adapter cable. OPC-2006 is required when using the HS-94, HS-95 and HS-97 with the IC-T70E

OPC-2006LS

Plug adapter cable. OPC-2006LS is required when using the HS-94, HS-95 and HS-97

OPC-2078

25-pin accessory cable

OPC-2144

Slim L-type plug adapter cable (Regular 2-pin connectors to slim L-type 2-pin connectors)

OPC-2218LU

Cloning Cable (USB type)

OPC-2253

Separation Cable 3.5m (11ft)

OPC-2254

Separation Cable 5m (16ft)

OPC-2274

5m audio connection cable for the IC-FR5100 series. D-SUB 25-pin connector

OPC-2275

5m audio connection cable for the IC-F5062 series and IC-A110 series. RJ-45 modular plug connector with speaker plug.

OPC-2276

5m audio connection cable for the HM-152 or SM-26. Modular jack connector with speaker jack.

OPC-2321

Control cable adapter for AH-740

OPC-2350LU

The OPC-2350LU USB Data Communication Cable.

OPC-2362

Zone Copy Cable (Mobile to handheld cable)

OPC-2364

Separation Cable for RMK-5 or RMK-7 (1.9m; 6.2ft)

OPC-2373

Separation Cable for HM-218, COMMANDMIC (1.9m; 6.2ft)

OPC-2377

Extension cable for OPC-2383/RC-RM600 (10m). Up to four cables can be connected.

OPC-2379

Headset Adapter Cable

OPC-2383

10m cable for RC-RM600 (same as supplied with RC-M600)

OPC-2384

Connects IC-M605EURO and RC-M600/HM-229.

OPC-254/L

DC Power lead with fuse

OPC-346

DC power lead

OPC-347

DC Power cable (7m)

OPC-420

Control cable for connection with AH-4 (10m)

OPC-440

MIC extension cable (5 metre)

OPC-441

Speaker extension cable

OPC-474

Cloning cable, radio-to-radio.

OPC-478

Cloning Cable (PC to transceiver)

OPC-478U

Cloning cable (USB cable, PC to receiver)

OPC-478UC

USB Cloning Cable - 3.5mm plug type for IC-F3022 series

OPC-499

Headset adapter with PTT socket for Icom Aviation handhelds.

OPC-515L

DC lead for battery chargers

OPC-581

Separation cable (3.5m)

OPC-587

Separation cable (5m)

OPC-589

Microphone adapter cable

OPC-591

Cloning cable (mobile to mobile)

OPC-592

Cloning cable (needs OPC-478)

OPC-598

Microphone adapter cable

OPC-599

Accessory extension cable (7m)

OPC-600

Separation cable (3.5m)

OPC-607

Seperation cable (3 meters)

OPC-609

Seperation cable (1.9m)

OPC-617

Accessory Cable

OPC-647

Microphone extension cable (2.5m)

OPC-656

DC Power Cable (for use with BC-121)

OPC-871

Aviation headset adaptor cable

OPC-922

Cloning Cable Adapter

OPC-966

OPC-966 Cloning/MAP27 Interface Cable (PC to transceiver)

OPC-966U

USB Cloning Cable - 9-pin connector type for IC-F3060 series

OPC-980

Cable Cloning

RC-25

Remote controller for IC-M802

RC-28.001

Sub Band Tuning Control for IC-7610.

RC-M600

Designed to work with the IC-M605EURO. IPX8 advanced waterproof (1 m depth of water for 60 min.) Supplied with OPC-2383 10 m (32.8 ft) cable, HM-205RB speaker microphone, DC power cable, MIC hanger and mobile bracket kit

RS-AERO1A

Android application software for flight planning.

RS-AERO1i

Download from AppStore℠.

RS-MS1A

Android application for the ID-5100A/E series

RS-MS1i

The RS-MS1I (for iOS™ devices) enable you to wirelessly connect to the ID-4100E and remotely set the DR functions, link with a map application and send/receive messages over the DV mode.

RS-MS3A

Terminal/Access point mode application for Android

RS-MS3W

Terminal/Access point mode software for Windows PC

RS-R30

The RS-R30I for iOS devices, and the RS-R30A for Android devices can be downloaded for free. They enable you to wirelessly connect to the IC-R30 and remotely control VFO operation, memory channels, a variety of scans and the voice recording functions. Using the optional VS-3, Bluetooth® headset, the VS-3 and iOS/Android device can be wirelessly connected to the IC-R30 at the same time. You can control the IC-R30 from the iOS/Android device while listening to the received audio on the VS-3 optional Bluetooth headset.