IC-FC5000E
IC-FC5000E dPMR™ Mode 3 External Controller (Discontinued)
The IC-FC5000E is an external controller for a dPMR™ Mode 3 multi site trunking system. dPMR is a 6.25 kHz FDMA based digital radio protocol described in the ETSI technical standards TS 102 658. It offers 6.25kHz spectrum efficiency, higher security and greater audio clarity even on the edge of the communication range.
dPMR™ Mode 3 Digital Trunking
In a dPMR Mode 3 digital trunking system, when a user requests a call through a dedicated control channel, the trunking controller automatically allocates one of the traffic channels and sets up the call. The system can accommodate a large number of users on a limited number of repeater channels with high efficiency. The System Control Software can interconnect multiple trunking controllers over an IP network, so the system can be expanded from a single site system to multiple sites and increases coverage. • Dedicated control channel
• Efficient spectrum usage
• Up to 32 channels per site One control channel, Up to 31 traffic channels
• Up to 32 site multi-site trunking with CS-FC5000SCS System Control Software
• Channel License System
• Automatic roaming from site to site • Subscriber registration Total dPMR™ Mode 3 Trunking Solution
• Single Site (4 Channels × 1 Site Model)
• Multi-site (6 Channels × 3 Site Model) Centralized Control Channel Trunking
Employing a high performance power amplifier, together with the solid heatsink built into the chassis, the IC-FC5000E provides a reliable 100% duty cycle operation at 50W output. Up to 32 Channels in a Site
The IC-FC5000E controls up to 32 channels of connected repeaters over an IP network. (One control channel and up to 31 traffic channels.) The IC-FC5000E can be configured from a web browser through an IP network. Up to 32 Site Multi-site Trunking
When used with the CS-FC5000SCS, System Control Software, up to 32 trunking controllers can be connected over an IP network for linking multiple sites. A radio can communicate with other radios registered to the interlinked trunked sites for wide area roaming and calling service. Channel License System
Four channel license activation key is supplied with the IC-FC5000E controller. When deploying five or more repeaters channels in a site, additional channel license activation keys are required for each repeater channel. Call Queuing
If all traffic channels are busy, the user’s call request is automatically stored in the call queuing until a traffic channel is available. A beep sound notifies when a traffic channel is available. Emergency Call with Pre-emption
The emergency call can give priority level to a normal call in the call queuing. If all traffic channels are busy, the emergency call forces another normal priority call to be cleared down. Maintenance Features
• CS-FC5000 web based management software allows to connect multiple clients
• CS-FC5000 supports localized language for system labels
• Firmware update over an IP network
• Remote reboot of the trunking controller over an IP network
• Repeater anomaly detection and alert
• A traffic channel can be configured as a secondary control channel Planned Enhancements
• Telephone interconnect
• 3rd party application interface
• Voice recording
• System administration enhancements
In a dPMR Mode 3 digital trunking system, when a user requests a call through a dedicated control channel, the trunking controller automatically allocates one of the traffic channels and sets up the call. The system can accommodate a large number of users on a limited number of repeater channels with high efficiency. The System Control Software can interconnect multiple trunking controllers over an IP network, so the system can be expanded from a single site system to multiple sites and increases coverage. • Dedicated control channel
• Efficient spectrum usage
• Up to 32 channels per site One control channel, Up to 31 traffic channels
• Up to 32 site multi-site trunking with CS-FC5000SCS System Control Software
• Channel License System
• Automatic roaming from site to site • Subscriber registration Total dPMR™ Mode 3 Trunking Solution
• Single Site (4 Channels × 1 Site Model)
• Multi-site (6 Channels × 3 Site Model) Centralized Control Channel Trunking
Employing a high performance power amplifier, together with the solid heatsink built into the chassis, the IC-FC5000E provides a reliable 100% duty cycle operation at 50W output. Up to 32 Channels in a Site
The IC-FC5000E controls up to 32 channels of connected repeaters over an IP network. (One control channel and up to 31 traffic channels.) The IC-FC5000E can be configured from a web browser through an IP network. Up to 32 Site Multi-site Trunking
When used with the CS-FC5000SCS, System Control Software, up to 32 trunking controllers can be connected over an IP network for linking multiple sites. A radio can communicate with other radios registered to the interlinked trunked sites for wide area roaming and calling service. Channel License System
Four channel license activation key is supplied with the IC-FC5000E controller. When deploying five or more repeaters channels in a site, additional channel license activation keys are required for each repeater channel. Call Queuing
If all traffic channels are busy, the user’s call request is automatically stored in the call queuing until a traffic channel is available. A beep sound notifies when a traffic channel is available. Emergency Call with Pre-emption
The emergency call can give priority level to a normal call in the call queuing. If all traffic channels are busy, the emergency call forces another normal priority call to be cleared down. Maintenance Features
• CS-FC5000 web based management software allows to connect multiple clients
• CS-FC5000 supports localized language for system labels
• Firmware update over an IP network
• Remote reboot of the trunking controller over an IP network
• Repeater anomaly detection and alert
• A traffic channel can be configured as a secondary control channel Planned Enhancements
• Telephone interconnect
• 3rd party application interface
• Voice recording
• System administration enhancements
- dPMR™ Mode 3 Digital Trunking
- Total dPMR™ Mode 3 Trunking Solution
- Centralized Control Channel Trunking
- Up to 32 Channels in a Site
- Up to 32 Site Multi-site Trunking
- Channel License System
- Call Queuing
- Emergency Call with Pre-emption
- Maintenance Features
- IC-F3162/F4162 Series
Designed for serious business use, the IC-F3162/F4162 VHF/UHF advanced handheld transceiver series includes the latest digital technology with the optional UT-126H "IDAS" 6.25kHz digital unit. While the IC-F3162 series looks the same its IC-F3062 predecessor, its functions and features have been upgraded. Together with the newly enhanced IC-F5062 digital mobile series and the IC-FR5100/IC-FR6100 digital repeater series can become an integral part of a sophisticated digital network. - IC-F3262D/F4262D Series
The Icom IC-F3262D handheld is a radio series that combines a rugged, waterproof and dustproof construction with an in-built GPS receiver and IDAS dPMR digital technology. - IC-F5062/F6062 Series
The IC-F5062/F6062* advanced VHF/UHF mobile series has the capability to work on a variety of existing radio systems and with the addition of an UT-126H “IDAS” 6.25kHz digital option board, an organisation has the capability to migrate to the latest digital two way radio technology. Together with the IC-F3162/F4162 VHF/UHF advanced handheld two way radio series and the IC-FR5100/IC-FR6100 digital repeater series can become an integral part of a sophisticated digital network. - IC-FR5100/IC-FR6100
The IC-FR5100/IC-FR6100 VHF/UHF commercial digital/analogue repeater series is the first Icom IDAS 6.25kHz digital capable repeater. It increases existing 12.5kHz channel capacity and offers easy way for organisations to migrate from analogue to digital in a cost effective, efficient way. - SR-VPN1
VPN Router for VE-PG3 multi-cast system