ID-RP2010V/ ID-RP4010V/ ID-RP1200VD

ID-RP2010V/ ID-RP4010V/ ID-RP1200VD
ID-RP2010V/ ID-RP4010V/ ID-RP1200VD D-STAR Repeaters

Introducing a new generation of D-STAR repeaters from Icom. The new repeaters utilise the latest technology to offer even greater flexibility in acting as a gateway allowing Amateur radio operators to communicate globally via the D-STAR network.

Three new D-STAR repeaters are available:

• ID-RP2010V 144MHz band D-STAR DV repeater (25W)
• ID-RP4010V 430MHz band D-STAR DV repeater (25W)
• ID-RP1200VD 1200MHz band D-STAR DV/DD repeater (10W)

For repeater owners with limited Internet resources, the optional UX-262 LTE Unit provides wireless Internet access. By combining the LTE unit and the Internet Gateway function, you can drop a repeater anywhere with LTE connectivity and be on the global network.

Integrated Controller Function
The ID-RP2010V/RP4010V/RP1200VD D-STAR repeaters have an integrated controller function within the RF module unit. Each repeater can work as an independent repeater to relay received signals. When connecting repeaters with a supplied Ethernet cable, cross-band operation is possible.

Compatible with ID-RP2C Repeater Controller
The ID-RP2010V/RP4010V/RP1200VD D-STAR repeaters are also compatible with the ID-RP2C external repeater controller. You can replace a repeater module in an existing ID-RP2 series D-STAR repeater site to use with the ID-RP2C repeater controller.

DD Mode Operation (ID-RP1200VD only)
The ID-RP1200VD 1.2 GHz repeater works in either DV or DD mode (switchable). DD mode provides data communication. The IC-9700, which has 1.2 GHz DD mode, becomes your wireless modem through your computer’s Ethernet port.

Optional UX-262 LTE Unit for Wireless Internet Connection
By installing the optional UX-262 LTE unit, each repeater can be directly connected to an LTE network* and the Internet. When using multiple repeater modules in a site, one LTE network can be shared with the multiple repeater modules (up to 4 modules).
* Network coverage provided by a generally available data SIM card. A static Global IP address is required for the Internet SIM.

Simple Internal Gateway
In combination with the optional LTE unit and the simple internal Gateway function, a D-STAR repeater site can be easily setup at short notice
*For full functionality and where multiple Repeaters are connected together, or extended functions such as reflectors are required we recommend the use of a Gateway Server PC.

D-STAR DV/Analogue FM Mix Mode Operation*
When using Mix mode operation, the repeater receives both D-STAR DV and analogue FM mode signals and relays the received signal in the same mode. This Mix mode function is useful for migrating existing analogue repeaters to a D-STAR repeater, while maintaining analogue FM mode compatibility. Single-mode operation (either DV or FM mode) is also programmable. For analogue FM mode operation, CTCSS, DTCS codes and 1750 Hz tone are programmable.
* The D-STAR gateway function cannot be used with FM mode signal. The Mix mode operation is not available with the ID-RP2C repater controller.

High Duty Cycle Operation
Employing a high-performance power amplifier, each D-STAR repeater can maintain up to 60 minutes of continuous transmission providing a reliable high duty cycle operation at 25 W RF output*.
* 25 W RF output power for ID-RP2010V/ID-RP4010V. 10 W output for ID-RP1200VD.

New RF Direct Sampling and FPGA Platform
Both the ID-RP2010V/ ID-RP4010V repeaters use RF Direct Sampling technology incorporated in the latest Icom Amateur radios. For 1.2 GHz, the Down Conversion IF sampling is used in the ID-RP1200VD repeater. Signals are processed in the FPGA digital domain that eliminate distortion and other elements seen in the legacy superheterodyne receivers. The result is greatly improved receiver sensitivity.

Other Features
• 19-inch rack-mount 2U height low profile
• CW ID/Voice ID transmitter
• SD card slot for firmware update, saving setting data and FM mode Voice ID audio
• 10 MHz reference signal input

  • Integrated Controller Function
  • Compatible with ID-RP2C Repeater Controller
  • DD Mode Operation (ID-RP1200VD only)
  • Optional UX-262 LTE Unit for Wireless Internet Connection
  • Simple Internal Gateway Function
  • Digital/Analogue Mixed Mode Operation
  • High Duty Cycle Operation
  • New RF Direct Sampling*1 and FPGA Platform
  • 19-inch rack-mount 2U height low profile
  • CW ID/Voice ID transmitter
  • SD card slot for firmware update, saving setting data and FM mode Voice ID audio
  • 10 MHz reference signal input
  • ID-RP2C
    One unit is required for each repeater station and can connect up to 4 RF modules. The ID-RP2C transfers the received signal to the specified RF module or the Internet gateway server.
  • UX-262
    LTE unit for ID-RP2010V, ID-RP4010V and ID-RP1200VD repeaters
Local Produce | Local Food | Farmers' Markets | Farm Shops | Veg Box Schemes | Pick Your Own Farms | Motorhome hire in Scotland | Pet Friendly Motorhome hire in Scotland | Motorhome Hire in Scotland | Motorhome Touring Treasures in Scotland | Motorhome Cycling Holidays | Motorhome Repairs in Scotland