ID-1
The controller software is supplied with the ID-1. When the ID-1 is connected to a PC via a USB cable, most functions of the ID-1 can be controlled from the PC. In Digital Data mode operation, you can browse web sites and send and receive e-mail as if the ID-1 is a 10W wireless network adapter. * Ethernet port is required for Digital Data mode operation.
* Service may not be provided at repeater site. Short message in DV mode
Short messages of 20 characters max. can be sent in Digital Voice mode operation. Useful Callsign Function
The ID-1 has useful callsign function that embeds your own and the called station’s callsign in your transmission. When you input “CQCQCQ” as the intended station, you can make a CQ call in the area. The calling station’s ID is displayed on the received station and a newly received callsign can be automatically stored in the memory. Digital Callsign Squelch (DSQL) & Digital Code Squelch (CSQL)
The DSQL opens the squelch, only when your callsign is received. When you share a single callsign with a club or group members, the CSQL function allows you to set a CSQL code from 00 to 99 and provides quiet stand-by while other members are talking. EMR Mode Operation
When you require the attention of all stations in the area, the Enhanced Monitor Request (EMR) mode operation allows the caller to bypass the CSQL and DSQL setting of the receivers station. During EMR mode operation, all receiving stations will hear your audio, even though they may be muted. Analogue FM Mode Operation
The ID-1 also operates in analogue FM mode, allowing you to communicate with an analogue FM transceiver. In FM mode operation, the ID-1 has CTCSS tone squelch for quiet stand-by. ID-1 Additional Features
• 950bps (approx.) data communication capability in Digital Voice mode
• 105 alphanumeric memory channels
• AFC (Automatic Frequency Control) function
• S-meter squelch
• Break-in communication Programmed, memory and select mode scan
• Stand-by beep
• Short Text Messaging
• Call Record, displays Calling stations
• Break function
• CTCSS encode/decode
- Operate in both D-STAR Digital Voice and Digital Data Mode
- Works with current analogue 1.2GHz repeaters
- PC Remote Control
- Short message in DV mode
- Callsign Function
- Digital Callsign Squelch (DSQL) & Digital Code Squelch (CSQL)
- EMR Mode Operation (Emergency)
- 950bps (approx.) data communication capability in Digital Voice mode
- 105 alphanumeric memory channels
- HM-154/T
Amateur radio Hand Microphone - HM-232
Easy to use hand microphone. - ID-RP2C
One unit is required for each repeater station and can connect up to 4 RF modules. The ID-RP2C transfers the received signal to the specified RF module or the Internet gateway server. - ID-RP2D
One of the most powerful functions of DSTAR is the ability to move data. The ID-RP2D is the Digital Data mode RF module for 1.2GHz and provides an access point with a high-speed data rate of 128kbps. Depending on the system set-up, the 128kbps is perfect for setting up an email and/or file server for EmComm support. It’s also perfect for connecting to the Internet for web applications or support. - ID-RP2V
For 23cm operation, the ID-RP2V 1.2GHz Digital Voice repeater connects to the ID-RP2C and receives/transmits 4.8kbps digital voice. - OPC-440
Microphone extension cable (5 metre) - SP-10
Mobile extension speaker (5W 4OHM) - SP-22
Mobile extension speaker (5 watt 4 ohms) - SP-35
The SP-35 external speaker replaces the SP-22 or SP-25 external speakers currently supplied with some of our mobile radios. The SP-35 is very similar to the SP-22 or SP-25 but features a more stylish, modern design.