IC-F5130D/F6130D Series

NXDN
IC-F5130D/F6130D Series
IC-F5130D/F6130D VHF/UHF Dual Mode Mobile Two Way Radios

The IC-F5130D (VHF) and IC-F6130D (UHF) is a new series of simple to use dual-mode mobile radios that provides organisations with mobile radios in their vehicle fleets with IDAS digital and analogue operation. One of the noticeable things about this radio, apart from its compact size, is its high contrast and wide viewing angle black background LCD which improves the visibility of the display for the operator. As well as having several Health & Safety features, the advanced technology built into this radio allows it to be used with the VE-PG4 RoIP gateway allowing it to be incorporated into a much larger radio system with other Icom radios and radio technologies.

Simple to Install, Easy to Use
The IC-F5130D series is an extremely compact radio that is very easy to use. Its size and interface make it an ideal radio for vehicle fleets, plant equipment or office use in various industries.

High Contrast and Wide Viewing Angle Black Background LCD
One of the noticeable things about the IC-F5130D series is its high contrast and wide viewing angle black background LCD which improves the visibility of the display for the operator.

Dual Mode Operation – IDAS Digital Mode and Analogue Two-Way radio Modes
The IC-F5130D series supports analogue mode, IDAS digital multi-site conventional mode, and IDAS digital single-site trunking mode. Dual mode provides an option for an organisation to migrate their fleet from analogue to digital.

Health & Safety functions for Radio Operators
The IC-F5130D series has many Health & Safety features. If the radio operator fails to operate the radio for a pre-set time, the Lone Worker function sounds an alert and prompts operation. Furthermore, if an operation is still not performed, the transmission can be forcibly initiated to check the sound in the surrounding area and the status of the operator. Power ON Password, Digital Voice Scrambler etc, are also available in the IC-F5130D series providing extra confidentiality to your communications.

Input / Output Interface for External Devices with Optional D-SUB Accessory Cable
The ACC connector cable allows you to connect various external equipment to the transceiver. It is possible to operate external equipment via the transceiver or operate the transceiver from the external equipment. Data Transfer over the air, such as GPS location, barcode, or telemetry data, is available.

General Features
• 136–174, 400–520 MHz versions
• 25 W RF Output power
• 128 Channels / 8 Zones
• High contrast, wide viewing angle, black background LCD
• Eight-character alphanumeric display
• 4 W (typical) front-mounted speaker
• MIL-STD-810 G shock, vibration, temperature and more
• DTMF autodial memories capability
• Microphone hanger action programmable
• Four programmable buttons
• GPS position display and Auto-Timed GPS send (External GPS required)

Operating Modes
• NXDN conventional
• NXDN Type-D single-site trunking
• NXDN simulcast
• NXDN multi-site conventional over IP network
• Analogue mode

Digital Functions (Voice and Data)
• PTT ID and ANI
• Over-the-Air Alias (OAA) displays the caller’s name without programming.
• Individual, Group and All call
• Late entry for Group call
• Status call and Polling call
• Short data messaging
• Call Alert
• Radio check (RX only)
• Call log
• Talkback timer

Analogue Functions
• CTCSS and DTCS tone
• 2-Tone and 5-Tone
• MDC functions; PTT ID, Emergency (TX/RX), Radio check (RX), Stun (RX), Revive (RX)
• BIIS PTT ID transmission

Security and Safety
• Digital voice scrambler
• Emergency call and Lone worker
• Remote monitor (RX)
• Radio Kill, Stun and Revive (RX)
• Power on Password

Scan Functions
• Up to 17 programmable scan lists
• Priority scan monitors one or two priority channels while scanning non-priority channels
• Voting scan automatically selects the optimal repeater site

Hardware Features
• Bluetooth® capability with optional UT-137A
• GPS receiver connection with optional ACC cable
• Optional D-SUB connector, OPC-2078/OPC-1939, for external PTT, channel, horn, ignition switch, and dimmer control, according to programming.

Note: No Digital Modulation “IN” when using an accessory cable.

Interconnect with other radio systems with the VE-PG4 RoIP gateway
The VE-PG4 is a versatile RoIP (Radio over IP network) gateway unit that interconnects the IC-F5130D series with other radio systems, even when using different bands.

  • Simple to install, Easy to Use
  • High Contrast and Wide Viewing Angle Black Background LCD
  • Dual Mode Operation – IDAS Digital Mode and Analogue Two-Way radio Modes
  • Health & Safety functions for Radio Operators
  • Digital voice scrambler
  • Input / Output Interface for External Devices with Optional D-SUB Accessory Cable
  • Interconnect with other radio systems with the VE-PG4 RoIP Gateway
  • Ideal for Vehicle Fleets, Plant Equipment or Office Use
  • HM-148G
    Heavy-duty microphone
  • HM-148T
    Heavy-duty microphone for business use
  • HM-152
    Hand Microphone for PMR transceivers.
  • HM-152T
    Hand microphone
  • HM-211
    Noise Canceling Hand Microphone
  • HM-239T
    Hand Microphone
  • OPC-1939
    15-pin accessory cable
  • OPC-2078
    25-pin accessory cable
  • OPC-2478
    DC Power Cable
  • OPC-2479
    DC Power Cable
  • ProEquip PRO-BT560
    Bluetooth PTT microphone with volume control and 3.5mm connector for headset.
  • SM-26
    The SM-26 desktop microphone is an affordable Icom desktop microphone for the Private Mobile Radio market.
  • SP-30
    20W rated input power (30W max. input) external speaker
  • SP-35
    The SP-35 external speaker replaces the SP-22 or SP-25 external speakers currently supplied with some of our mobile radios. The SP-35 is very similar to the SP-22 or SP-25 but features a more stylish, modern design.
  • SP-35L
    External Speaker with 6m cable
  • UT-137A
    Bluetooth unit for the IC-F5130D/F6130D Series
  • VS-3
    Bluetooth headset with earpiece and microphone (comes with PTT switch).

A short introduction to Icom's new IC-F5130D (VHF) and IC-F6130D (UHF) compact mobile radio...a new series of simple to use dual-mode mobile radios that provides organisations with radios for their vehicle fleets with IDAS digital and analogue operation.

Local Produce | Local Food | Farmers' Markets | Farm Shops | Veg Box Schemes | Pick Your Own Farms | Motorhome hire in Scotland | Pet Friendly Motorhome hire in Scotland | Motorhome Hire in Scotland | Motorhome Touring Treasures in Scotland | Motorhome Cycling Holidays | Motorhome Repairs in Scotland