IC-V80E
The IC-V80E utilises a new low consumption current FET module and provides 5.5W of high power and long operating time. For even longer operating time, 2.5W or 0.5W of reduced output power settings can be selected. 750mW Loud Audio
The IC-V80E uses the BTL (bridge-tied load) amplifier that doubles the audio output. The IC-V80E’s BTL increases the audio output by doubling the voltage delivered to the speaker. The 36mm large speaker delivers 750mW of loud and intelligible audio, great for noisy environments.
* Typical value using internal speaker. Tough Construction
Icom radios are built tough, and the IC-V80E and this military rugged rig offers water resistance and superior protection against dust and dirt (IP54). Compact, rugged and with plenty of power, the IC-V80E is ideal for basic, on-the-go Amateur radio operations. Alphanumeric Display
A 5-character alphanumeric display clearly shows channel name, operating frequency and memory number with bright illumination. An S-meter icon ( ) shows the signal strength of the receiving frequency and output power level while transmitting. 207 Memory Channels
The IC-V80E has a total of 207 memory channels, including 200 regular channels, 6 channels, including 200 regular channels, 6 scan edges and 1 call channel. The channel name is programmable with 5 characters for easy recognition. Internal VOX Function
The IC-V80E has internal VOX (Voice Operated Transmit) function for convenient hands-free operation with a compatible optional headset and plug adapter cable. Also, the VOX gain and VOX delay time are adjustable. Built-in CTCSS & DTCS
The CTCSS and DTCS tones are built-in for quiet stand-by and repeater access. Pocket beep and tone scan are also possible. The tone scan allows the operator to detect the subaudible tone that is used for repeater access. Scan Functions
Various scan functions including program, memory, skip, priority and tone scan can be programmed. Other Features
• Power save function
• BNC type antenna connector
• TOT (time out timer) setting
• Repeater lockout and busy channel lockout
• PC cloning capability and transceiver to transceiver cloning
• DTMF memory channels
• Auto power off Wide/narrow channel setting
- 144MHz single band handheld
- 5.5W of output power
- 750mW (typical) of loud and intelligible audio with the BTL amplifier circuitry
- 13 hours* of operating time with the supplied 1400mAh Ni-MH battery pack(* Approx for 5:5:90 duty cycle with power save on)
- Dust protection and water resistant construction, equivalent to IP54
- Tested to the MIL-STD-810-F
- VOX function built-in (Optional headset and adapter cable required.)
- 5-character alphanumeric display
- 207 memory channels
- CTCSS and DTCS tone squelch
- DTMF memory channels
- BC-01
UK mains adapter for use with Icom radio chargers. - BC-06
UK 12v 1Amp charger. - BC-191
Rapid desktop charger for BP-264 Ni-MH battery pack. Charges the BP-264 in 2 hours. - BC-192
Regular desktop charger for BP-264 Ni-MH battery pack. Charges the BP-264 in 16 hours. Includes BC-01 AC adapter. - BC-193
Rapid desktop charger for Li-Ion battery pack BP-265. Charges the BP-265 in 2.5 hours. Includes BC-06 AC adapter. - BP-263
AA (LR6)x 6 cells - BP-264
7.2V/1400mAh Ni-MH battery. - BP-265
7.4V/1900mAh 2000mAh Li-Ion battery - FA-B2E
VHF Antenna for IC-T3/V8. - HM-153/L
PMR Hand Microphone - HM-158L
PMR and Amateur radio hand microphone - HM-159SC/L
Heavy-duty hand microphone. - HS-94
Headset (Ear-piece type) - HS-95
Provides Hands-free operation. - HS-97
Earphone with Throat-mic - LC-174
Leather carry case. - MB-124
Alligator type belt clip - OPC-2004
Plug adapter cable. OPC-2004 is required when using the HS-94, HS-95 and HS-97 with the IC-V80E and IC-F3002 Series - OPC-474
Cloning cable, radio-to-radio. - OPC-478
Cloning Cable (PC to transceiver) - OPC-478UC
USB Cloning Cable - 3.5mm plug type - OPC-515L
DC lead for battery chargers