IC-F3162/F4162 Series

dPMR NXDN
IC-F3162/F4162 Series
VHF/UHF Advanced Handheld Series (Discontinued)

Designed for serious business use, the IC-F3162/F4162 VHF/UHF advanced handheld transceiver series includes the latest digital technology with the optional UT-126H "IDAS" 6.25kHz digital unit. While the IC-F3162 series looks the same its IC-F3062 predecessor, its functions and features have been upgraded. Together with the newly enhanced IC-F5062 digital mobile series and the IC-FR5100/IC-FR6100 digital repeater series can become an integral part of a sophisticated digital network.

This product is no longer available. If you are looking for a replacement, please visit the IC-F3400D/F4400D Series Digital Two Way Radio Handheld Series product page.

4 versions available
IC-F3162S VHF transceiver, 5W, without keypad
IC-F3162T VHF transceiver, 5W, with keypad
IC-F4162S UHF transceiver, 5W, without keypad
IC-F4162T UHF transceiver, 5W, with keypad

IDAS 6.25kHz digital functions upgraded
With the UT-126H digital unit, the following digital functions are available:

Digital/analogue mixed mode operation
Digital/analogue mixed mode scan
Up to 64 RAN (Radio Access Number) settings for digital code squelch
Individual, Talkgroup and All Call
Data call (12-characters)
Status message/request
Digital Encryption using 15-bit encryption key
Call alert
Radio check
Radio stun/kill/revive
Remote monitor
Emergency call
Simultaneous GPS position report with voice call

Improved voting function
Operating modes such as conventional mode and voting mode are programmed according to the memory zone. Once you program the voting mode to a memory zone, you can easily start voting mode operation by changing the zone setting.
Voting group name and voted channel name indication
Re-vote after talk function ... Automatically restart vote scanning when a call is finished.

Lone worker function
The lone worker function is a substitute for the man down function. When the radio is not operated for a preset period (1 to 255 minutes), the radio sounds a beep requiring you to push any button. If a button is not pressed, an emergency signal is automatically transmitted and informs co-workers or a dispatcher that something may have happened to the individual worker.

Enhanced Scanning features
New scanning features have been added allowing migration from other radio brands.
Mode dependent scan ... when the user changes the operating channel, the scanning list automatically changes following that channel setting.
Tx channel programmable ... The Tx channel is the channel the radio transmits when the user pushes the PTT button while scanning. The Tx channel can be programmable per scanning list from start, last detected, priority and pre-programmed channels.
Talk back function ... allows you to transmit on the detected channel when scanning stops or soon after scanning resumes, prior to the Tx channel setting.
Talk back timer beep ... alerts you of the end of the talk back time with a beep sound.
Nuisance delete ... Users can temporary skip a busy channel from the scanning list.
Monitor key action ...A user can stop a scan when pushing the monitor button.

New features
Direct input of the Tx code (5-Tone), Individual/Talkgroup ID (Digital), Status number (BIIS/Digital), Message number (Digital) from the 10-key pad
Escalating alarm
Shares same cloning software, CS-F3160/F5060 as mobile Stun revive function (5-Tone)
Programmable emergency button for a third party microphone
GPS position reporting function (BIIS/Digital mode) with optional HM-170GP Improved low battery beep (Tx end function and beep periods programmable)

Retained Features (From IC-F3062 series)
Full dot-matrix LCD
The IC-F3162 series has an easy to read, large full dot-matrix LCD (32 x18 mm), that shows upper and lower case characters clearly. The display setting is selectable from 1 line, 12 characters or 2 lines 24 characters via programming. While status icons are on the top side of the display, the bottom side shows assigned functions to the [P0] to [P3] buttons.

Large capacity Lithium-Ion battery pack
The supplied BP-232N 2000mAh large Li-Ion battery pack, provides 15 hours* of operating time (analogue/digital modes).
* Typical operation Tx:Rx: Standby=5:5:90

Voice scrambler function
The IC-F3162 series has a built-in inversion type voice scrambler as standard. By installing an optional voice scrambler unit, UT-109R or UT-110R, more secure communication can be possible.

BTL amplifier
The IC-F3162 series employs a BTL amplifier that doubles the audio output delivering loud and clear sound.

512 memory channels and rotary channel knob
The IC-F3162 series has 512 programmable channels with 128 zones. With a simple rotation of the rotary channel knob, memory channels can be selected.

Most popular signalling built-in
The IC-F3162 series has 2-Tone, 5-Tone, CTCSS and DTCS signalling capabilities as standard for group communication or selective calling. The IC-F3162 series can decode ten 2-Tone codes or eight 5-Tone codes on a channel. When a matched tone is received, various actions are programmable for each code such as beep sounds, bell icons, answer back calls, Auto TX, stun/kill radio, scans etc. 40 pairs of CTCSS/DTCS memory channels are also available.

IC-F3162/F4162 Series Additional Features
Built-in audio compander
Flash CPU for future firmware updates
Surveillance function temporarily turns off the LED backlight and beep sound
VOX ready for hands-free operation
Embedded ESN (Electronic serial number)

  • IDAS 6.25kHz digital functions
  • IDAS digital ready version available
  • Improved voting function
  • Lone worker function
  • Enhanced scanning features
  • BTL amplifier for loud and clear sound
  • Full dot-matrix display
  • 512 memory channels and rotary channel knob
  • Lithium-Ion battery pack and rapid charger as standard
  • IP-55 Dust protection and splash resistance
  • 2 year warranty on transceiver, 1 year warranty on accessories
  • AD-106
    Charger adapter for use with BC-119N/121N (BP-209/210/211/222)
  • AD-52
    Earphone Jack Adapter
  • BC-119N
    Universal Icom Fast Charger
  • BC-121N
  • BC-145
    AC adapter for BC-119N & BC-144
  • BC-160
    The BC-160 charger has been designed to work with our latest range of Li-ion battery packs, the BP-230, BP-231 and BP-232.
  • BP-230N
    Voltage/Capacity - 7.4V/800mAh Li-ion Battery
  • BP-232/N/H/WP
    Voltage/Capacity - 7.4V/2000mAh Charge time (approx.) - 1.5 hours
  • BP-240
    AAA (LR03) x 6 battery case
  • EARPIECE.003
    Ear-piece for most Icom handhelds (3.5mm jack. RX only)
  • FA-SC25U
    UHF antenna for 400-430 MHz
  • FA-SC55V
    Antenna (150-174 MHz)
  • FA-SC57U
    Antenna (430-470 MHz)
  • FA-SC57VS
    Stubby antenna 160 -174MHz
  • FA-SC73US
    Stubby antenna 450 -470MHz
  • HM-131 (L/SC)
    Speaker Microphone
  • HM-159SC/L
    Heavy-duty hand microphone.
  • HM-169
    IPx7 class environmental protection. Slim, yet rugged MIL Spec. build with sturdy rotary type belt clip and metal base. Waterproof connector: 9-pin “multi-connector”.
  • HM-170GP
    IPx7 class environmental protection
  • HS-94
    Headset (Ear-piece type)
  • HS-95
    Hands-free operation. Requires VS-1/1L/1SL VOX unit for use.
  • HS-97
    (Earphone with Throat-mic)
  • MB-93
    Swivel belt clip
  • MB-94
    Alligator type belt-clip
  • MB-96F
    Leather belt clip for IC-F51/61 ATEX
  • MB-96N
    Swivel type leather belt hanger (Swivel joint of the MB-86 is required).
  • OPC-966
    OPC-966 Cloning/MAP27 Interface Cable (PC to transceiver)
  • UT-109R
    Non-rolling type voice scrambler unite. 40-pin type.
  • UT-110R
    Rolling type voice scrambler unit. 40-pin type.
  • UT-124/R
    Man-down unit aimed at commercial users. Both UT-124 (30-pin type) and UT-124R (40-pin type) have a state of the art two-axis acceleration sensor providing a more accurate man down state detection.
  • UT-126H Digital Unit
    The UT-126H is similar to the UT-119H. The difference is that the optional unit and radio circuit have been modified to achieve 60dB adjacent channel selectivity performance.
  • UT-96R
    2-tone/-tone unit. 40-pin type. for use with the IC-F3062/F4062 series
  • VS-1/L
    Vox/PTT switch unit for use with the HS-94, HS-95, HS-96 & HS-97.
Local Produce | Local Food | Farmers' Markets | Farm Shops | Veg Box Schemes | Pick Your Own Farms | Motorhome hire in Scotland | Pet Friendly Motorhome hire in Scotland | Motorhome Hire in Scotland | Motorhome Touring Treasures in Scotland | Motorhome Cycling Holidays | Motorhome Repairs in Scotland