IC-F3262D/F4262D Series

dPMR
IC-F3262D/F4262D Series
dPMR VHF/UHF Digital Handheld Series with GPS (Discontinued)

The Icom IC-F3262D handheld is a radio series that combines a rugged, waterproof and dustproof construction with an in-built GPS receiver and IDAS dPMR digital technology.

This product is no longer available. If you are looking for a replacement, please visit the IC-F3400D/F4400D Digital Two Way Radio Handheld Series product page.

IDAS™ dPMR™ Features
The IC-F3262D series provides dPMR mode 1/2 operation. Compatibility with dPMR mode 3 operation planned. The following IDAS dPMR features are programmable:

• Individual/group call
• All group call
• Emergency
• Call log
• SDM (Short Data Message)
• Status message
• GPS
• Stun, kill and revive
• Digital voice scrambler
• Digital colour code
• Transparent data mode

Built-in GPS Receiver
The IC-F3262D series has an internally integrated GPS receiver*. Current position data can be attached to a voice or data (SDM, status or emergency signal) transmission and can be sent to dispatch stations*.
* Depending on version. * To show the received position data, an external PC application is required.

Man Down and Lone Worker Functions for Emergency Call
The integrated man down function* automatically sends an emergency signal when the transceiver is left in a horizontal position for a preset period. The lone worker function can also transmit an emergency signal when the radio is not operated for a preset period. These emergency signals can be sent with GPS position data* to alert your co-workers or dispatcher to any potential trouble.
* Depending on version.

800mW (typ.) Audio Output Power
The built-in BTL amplifier doubles the audio output power and the large 40mm speaker delivers loud 800mW (typ.) audio to receive all calls under noisy conditions.

New 14-pin Accessory Connector
The new 14-pin accessory connector enhances the IC-F3262D series performance and capabilities. The BTL amplifier audio can deliver 1000mW (typ.) of loud audio from the optional HM-184 speaker microphone. When using the optional OPC-1870 zone copy cable, the memory channels in the tactical group can be copied to another radio.

IP67 Waterproof and Dust-tight Protection
The IC-F3262D series provides outstanding protection against dust and water that is equivalent to IP67. The IC-F3261D series can withstand 1m depth of water for 30 minutes and its dust-tight construction keeps out powder dust, sand, mud etc. * To guarantee the IP67 rating, the BP-232WP battery pack must be used with the IC-F3262D series. The “IP67” label is attached to the BP-232WP for an identification mark.

Analogue FM Mode Features
• 5-Tone, CTCSS and DTCS
• MDC 1200 compatible
• Inversion voice scrambler
• Basic LTR trunking
• Audio compander

Other Features
• 512 memory channels with 128 zones
• Dot-matrix, multi-function display
• Large 2300mAh (typ.) Lithium-Ion battery
• MIL-STD 810 G rugged construction
• Mode dependent scan and priority scan
• DTMF autodial
• Busy channel lockout, repeater lockout
• Talk around function
• Time-out-timer
• Escalating alarm
• Surveillance function
• Power on password
• Low battery alert
• New optional MB-130 vehicle charger bracket

  • IDAS dPMR
  • Built-in GPS Receiver*1
  • Integrated Man Down Function*1
  • IP67 Waterproof and Dust-tight Protection
  • 800mW (typ.) Loud Audio Output
  • New 14-pin Accessory Connector
  • 5-Tone, CTCSS and DTCS Encoder/Decoder Built-in*2
  • MDC 1200 and BIIS 1200 compatible*2
  • Basic LTR Trunking
  • 512 Memory Channels with 128 Zones
  • Full Dot-Matrix Display
  • Inversion Voice Scrambler
  • Audio Compander*2
  • Uses the same cloning software as IC-F3162 series
  • *1 Depending on version. *2 Analogue mode only.
  • AD-106
    Charger adapter for use with BC-119N/121N (BP-209/210/211/222)
  • AD-118
    Allows you to use third party accessories with 6-pin Hirose plug.
  • AD-122
    Charger adapter for the BC-197
  • BC-119N
    Universal Icom Fast Charger
  • BC-121N
  • BC-145
    AC adapter for BC-119N & BC-144
  • BC-157S
    AC Adapter
  • BC-160
    The BC-160 charger has been designed to work with our latest range of Li-ion battery packs, the BP-230, BP-231 and BP-232.
  • BC-171
    Regular desktop charger. Charges the battery pack in 8–10 hours (approx.)
  • BC-197N
    Multi-charger. Rapidly charges up to six batteries. Requires BC-157 and six adapters.
  • BP-232/N/H/WP
    Voltage/Capacity - 7.4V/2000mAh Charge time (approx.) - 1.5 hours
  • BP-240
    AAA (LR03) x 6 battery case
  • BP-261
    AA (LR6) x 6 battery case
  • FA-SC25U
    UHF antenna for 400-430 MHz
  • FA-SC55V
    Antenna (150-174 MHz)
  • FA-SC57U
    Antenna (430-470 MHz)
  • FA-SC57VS
    Stubby antenna 160 -174MHz
  • FA-SC73US
    Stubby antenna 450 -470MHz
  • MB-130
    Vehicle charger bracket to use BC-160 charger in a vehicle.
  • MB-93
    Swivel belt clip
  • MB-94
    Alligator type belt-clip
  • MB-96F
    Leather belt clip for IC-F51/61 ATEX
  • MB-96N
    Swivel type leather belt hanger (Swivel joint of the MB-86 is required).
  • OPC-515L
    DC lead for battery chargers
  • OPC-656
    DC Power Cable (for use with BC-121)
Local Produce | Local Food | Farmers' Markets | Farm Shops | Veg Box Schemes | Pick Your Own Farms | Motorhome hire in Scotland | Pet Friendly Motorhome hire in Scotland | Motorhome Hire in Scotland | Motorhome Touring Treasures in Scotland | Motorhome Cycling Holidays | Motorhome Repairs in Scotland